Jump to content

Our Official NAGF Flags

are now available in the NAGF Online Store in TWO Sizes! Don't miss your chance of being one of the first to fly the new high visibility NAGF Flag!!!


Click Here To Go To the NAGF Online Store!!!



NAGF Admin NAGF Admin
NAGF News Ticker
  • Happy 4th of July Everyone!!!
  • New Members are always welome!!!
  • NAGF

L E D's installed in brake/marker lights.

3 posts in this topic Last Reply

Recommended Posts


I installed L E D's in my brake/marker lights now the tail light warning light in the dash comes on.

Why is this ? do I have to install a resistor like the turn signals use?

I have a 1984 Aspencade and am trying to cut down on power consumption.

Thanks for any and all help.


Share this post

Link to post
Share on other sites

I believe you do but I don't have a clue as to what size you'll need... If you're worried about the stator and regulator being overloaded AND if you don't have all kinds of "Bling" lighting on it, I'd concentrate on the basics of having good, robust, soldered connections on the charging system starting with removing the stator connector, then the regulator connector and then bypassing the 30 amp dogbone main fuse located on the starter solenoid with an inline fuse. I did this to my Ltd Ed back in '07 and have had no problems since...


Good Luck with her!!

Share this post

Link to post
Share on other sites

There is also a brake light sensor under the seat.  I believe the wire going to the dash light was white on my 86-I, and I just snipped the wire.   If you want to go this route you should check a wiring diagram for your model.

Share this post

Link to post
Share on other sites
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...

Important Information

By using this site, you agree to our Terms of Use,